xtraview combinations
|
XtraView Combinations |
3 Decoders In XtraView |
|
Compatible Decoders • 1110 / 1131 / 1132 / HD4U + 1110 / 1131 / 1132 / HD4U / HD5U • HD PVR + HD PVR (Pace / UEC, 4 or 2 tuner) • HD PVR (Pace / UEC, 4 or 2 tuner) + SD PVR • HD PVR (Pace / UEC, 4 or 2 tuner) + 1110 / 1131 / 1132 / HD4U / HD5U • Explora (1&2) + Explora (1&2) • Explora (1&2) + All the above decoders |
• HD 5U (4137) • HD 4U (4136) • HD PVR Explora (1 & 2) |
XtraView Checklist
- Check that both decoders are XtraView compatible
- Ensure the heart beat cable is connected correctly and securely
- Ensure the XtraView menu settings correspond with where the heartbeat cable is connected (RF In & RF Out)
- Ensure that the XtraView activation is done correctly on Clarity
Important facts about the SD PVR on XtraView
- The SD PVR will always be a secondary decoder on a XtraView network
- The heartbeat cable will always connect to the RF Out port on the SD PVR
- The SD PVR only works with the HD PVR and Explora on XtraView
- A heartbeat test can only be done from the HD PVR to the SD PVR
Installation Options For 2 Decoders On xtraview
1110/1131 to 1110/1131
1110/1131 to HD PVR
HD PVR to SD PVR
DStv Explora to DStv Explora
➢ The maximum Cable length between the DStv Switch and DStv Explora should be less than 50 meters
➢ Maximum Cable length between 2 DStv Switch (when cascading to connect 2 Explora’s should be less than 50cm
DStv Explora to 1132
DStv Explora to 2-Tuner
DStv Explora to 4-Tuner
Two DStv Explora’s with Smart LNB
Decoder Menu xtraview settings
xtraView Menu - 11 Series Remote control setup
|
Status : Primary |
||
|
1 |
Communication Port : |
RF OUT |
|
2 |
Remote Control Mode 1 |
RESPOND |
|
3 |
Remote Control Mode 2 |
RELAY |
|
4 |
Remote Control Mode 3 |
IGNORE |
|
5 |
Remote Control Mode 4 |
IGNORE |
|
Communication – Waiting |
||
Xtraview Menu Settings - Installation Options
|
Decoder Combination |
Primary DSD |
Single View |
HD |
Single View |
HD |
HD |
|
Secondary DSD |
Single View |
Single View |
HD |
HD |
HD |
|
Primary Decoder |
Comm Port |
RF In |
RF In |
RF In |
RF In |
RF In |
|
Remote Mode |
TV 1 |
TV 1 |
TV 1 |
TV 1 |
TV 1 |
|
|
Relay Remote Command |
TV 2 |
ON |
TV 2 |
ON |
ON |
|
|
Accept Relayed Command |
OFF |
ON |
OFF |
ON |
ON |
|
Secondary Decoder |
Comm Port |
RF Out |
RF Out |
RF Out |
RF Out |
RF Out |
|
Remote Mode |
TV 2 |
TV 2 |
TV 2 |
SD / HD Remote |
TV 2 |
|
|
Relay Remote Command |
Off |
Off |
On |
Off |
Off |
|
|
Accept Relayed Command |
TV 2 |
TV 2 |
OFF |
ON |
Off |
Installation Options for 3 decoders in xtraview [ 3 decoders , one subscription,2 access fees ]
The primary decoder in this xtraview set up MUST always be the DStv Explora
Allowed Combinations – 3 Decoders In xtraview
|
Primary |
1st Secondary |
2nd Secondary |
|
Dstv Explora |
Dstv Explora |
Dstv Explora |
|
Dstv Explora |
Dstv Explora |
Dstv HD Decoder 4U |
|
Dstv Explora |
Dstv HD Decoder 4U |
Dstv HD Decoder 4U |
It is recommended that all XtraView installations be done by DStv accredited installers. The recommended installation for three decoders on XtraView is a DStv Smart LNB. If the customer disconnects the primary decoder, installation changes may be required. (i.e. a heartbeat cable will need to be installed between the 1st Secondary & 2nd Secondary decoders)
Smart lnb extra view installation with 3 exploras
User Band Settings - 3 Explora’s In XtraView
|
Explora Primary |
|
|
Satellite settings |
|
|
User band 1 Frequency |
1210 |
|
User band 2 Frequency |
1420 |
|
User band 3 Frequency |
1680 |
|
User band 1 Index |
0 |
|
User band 2 Index |
1 |
|
User band 3 Index |
2 |
|
Explora 1st Secondary |
|
|
Satellite settings |
|
|
User band 1 Frequency |
2040 |
|
User band 2 Frequency |
1006 |
|
User band 3 Frequency |
1680 |
|
User band 1 Index |
3 |
|
User band 2 Index |
4 |
|
User band 3 Index |
2 |
|
Explora 2nd Secondary |
|
|
Satellite settings |
|
|
User band 1 Frequency |
1057 |
|
User band 2 Frequency |
1108 |
|
User band 3 Frequency |
1159 |
|
User band 1 Index |
5 |
|
User band 2 Index |
6 |
|
User band 3 Index |
7 |
Smart LNB + 1 Explora + 2 HD 4U
User Band Settings - 1 Explora & 2 HD 4Us
|
Explora Primary |
|
|
Satellite settings |
|
|
User band 1 Frequency |
1210 |
|
User band 2 Frequency |
1420 |
|
User band 3 Frequency |
1680 |
|
User band 1 Index |
0 |
|
User band 2 Index |
1 |
|
User band 3 Index |
2 |
|
HD Decoder 1st Secondary |
|
|
Satellite settings |
|
|
User band 1 Frequency |
2040 |
|
User band 1 Index |
3 |
|
HD Decoder 3rd Secondary |
|
|
Satellite settings |
|
|
User band 1 Frequency |
1006 |
|
User band 1 Index |
4 |
Quad LNB + Smart Switch + 3 Explora’s
Smart LNB With Combiners
Smart LNB + 3 Explora’s + 2 Way Splitter
Smart LNB + 3 Explora’s + 3 Way Splitter
