Standby Button
Switches the decoder between ON and STANDBY modes. When pressed in for 5 seconds, it resets the decoder
LED / Front Panel Display
Indicates response to remote control commands and / or error mode
- SOLID RED = decoder is in standby mode
- SOLID GREEN and SOLID AMBER = decoder is tuned to an audio channel
- GREEN FLASH = RCU command received
P- Changes to the PREVIOUS channel available
P+ Changes to the NEXT channel available
P+ & P- When pressed simultaneously, it toggles to UHF mode
Smartcard Slot
Where the decoder smartcard is slotted
LNB In This is where a cable coming from the dish must be screwed in
RF In Connects “RF In” to the terrestrial antenna
RF Out Connects “RF Out” to the TV antenna input
RCA Input Red & White for sound / audio and Yellow for picture
Power Input The power cable is connected here